Meanwhile, the roof offers a home to three 120/140mm fans, as well as a 360/420mm radiator. Like the Airflow 5000, all three of the large radiator mounts are removable, allowing you to fit fans, radiators or a combination of the two from the comfort of your desk, instead of reaching inside the chassis.
All four locations use dust filters and are quick to access as well, making it a pain-free experience to build a water-cooled PC. However, you’ll want to do some stretches before you try to lug this 18.7kg chassis around with you.
Needless to say, there’s the potential here for a cooling arrangement that can deal with almost any hardware you can throw at it. Plus, with so many radiator options, any system you build will benefit from that flexibility.
In terms of storage, you get six 3.5in hard disk mounts and four 2.5in SSD mounts, which is plenty, even for a high-end content creator. All the storage mounts are removable too, so you can ditch them to boost airflow, reduce clutter below the PSU cover or make way for front-mounted radiators, where you’ll need to adjust the PSU cover to open up the front of the case. This cover hides the bowels of the case in front of the PSU and the interior does look much smarter as a result.
There are plenty of ways to install your graphics card in the 7000D Airflow too. The case can configure its PCI-E slots in a vertical or horizontal orientation, keeping the graphics card cooler well away from the side panel. Alternatively, there’s a triple-slot mount located closer to the side panel, although we recommend only using that for water-cooled GPUs. Sadly, there’s no PCI-E riser cable in the box, which we’d expect, given the case won’t leave you with much change from £250.
The front panel doesn’t offer any standout features either, except for four USB 3 ports instead of the usual two, plus a Type-C port. The 7000D Airflow lacks the built-in RGB lighting and software control options you’ll see in the iCUE-versions of both it and the 5000-series cases as well, so there’s no iCUE commander Core XT hub included. However, you do get a 6-port PWM fan hub, with all three included 140mm fans already hooked up, allowing you to power them from a single fan header.
The side panels hinge outwards, so getting at the interior is simple, and another classy touch is a clear cover for a window in the PSU shroud. This gives you a view of the PSU, revealing its logo, but Corsair suggests this can be customised with stickers, vinyl or engraving. Cable routing is excellent as well, with three large Velcro ties, plenty of anchor points and cable-routing holes, although again, nothing here particularly stands out as unique or innovative.
The 7000D Airflow’s CPU delta T of 47°C is excellent, and slightly better than the result from the 5000D, which is to be expected since it has slightly better airflow. If you decide to kit the case out with an air-cooled system, it’s good to know it has what it takes out of the box to do a decent job of cooling your hardware. This result was a match for the be quiet! Silent Base 802 and Fractal Design Meshify 2 as well.
The GPU delta T was again a tad better than its smaller sibling and just ahead of the be quiet! Silent Base 802 and Fractal Design Meshify 2. While the fans were reasonably quiet, the be quiet! case was quieter still, but the 7000D Airflow isn’t going to annoy you with the fans at full speed. With so many fan mounts and room to install radiators, there are plenty of options beyond the stock configuration anyway.
The Corsair 7000D Airflow is one of the easiest cases to water-cool we’ve ever seen. However, at £240, it’s not quite an unequivocal recommendation despite its excellent out-of-the-box cooling, cavernous interior, useful features and flexible design.
It’s missing the unique features and pizzazz we’d expect at this price. It’s far from a bland box, and it has plenty of extra features, but even the basic version costs nearly £250 and the iCUE RGB fan-equipped version retails for £300. That’s a lot of money for a case in anyone’s books.
You certainly get your money’s worth in terms of size, water-cooling support and volume, but it’s otherwise unremarkable. The main issue is that you’d need to fill at least two of the massive radiator mounts to make it worthwhile, which means you need a hardware specification to match, and not even high-end gamers will need that much cooling headroom.
It’s otherwise an excellent case that would look great fully kitted out with water-cooling hardware, but for most people, the 5000D or 5000X will do the job perfectly well for half the price.
Perfect for extreme water cooling, but it’s expensive and lacks pizzazz.
£240 inc VAT
COOLING 28/30 | FEATURES 15/20 | DESIGN 28/30 | VALUE 11/20 | OVERALL 82%
+Fantastic water-cooling support
+Easy hardware installation
-No PCI-E riser cable included
Dimensions (mm) 248 x 550 x 600 (W x D x H)
Material Steel, plastic, glass
Available colours Black, white
Front panel Power, reset, 4 x USB 3, 1 x USB 3.1 Type-C, 1 x stereo/mic
Drive bays 6 x 2.5/3.5in, 4 x 2.5in
Form factor(s) E-ATX, ATX, Micro-ATX
Cooling 4 x 120mm/3 x 140mm front fan mounts (2 x 140mm fan included), 4 x 120mm side fan mounts (fans not included), 1 x 120/140mm rear fan mount (140mm fan included), 3 x 120mm/140mm roof fan mounts (fans not included)
CPU cooler clearance 190mm
Maximum graphics card length 450mm